- How to using the RZNC-1004
- Author:RICHNC
- Published:2008-08-01
- Download:【Download】
How to using the RZNC-1004(4 axis)
RZNC-1004 is different with others.
1.Make the working origin
"XY->0" method: press the "ON/OFF" key first and press the "4" key as soon, then leave your fingers same time
"Z->0" method:press the "ON/OFF" key first and press the "8" key as soon, then leave your fingers same time
"C->0" method:press the "MENU" key first and press the "MODE" key as soon, then leave your fingers same time
2.Moving the C axis
you can press the "4" key to C+ dir
you can press the "8" key to C- dir
3.Go home mode
controller will C axis first go home, then Z axis go home, then Y axis,then X axis
4.How to showing on LCD
C axis will showing angle mode and rotation as angle too.
5.Speed limited
you can limited X Y Z C axis in the Menu---machine setup----speed limited
6.How to connect the C axis with connect board
C axis will using the normal connect board, connect the wire with C axis on connect board.
7.How to connect the C axis with the home switch
C axis home sensor will using the Cutter inputs(J9) as the home sensor
8.How to connect the Cutter sensor
the Cutter sensor(J9) as the C axis home switch. using same inputs.
9.you can download the RZNC-1004 Diagram for you wire connect.
if you have any problem ,you can email to richnc@hotmail.com ,we will solve your problem ASAP.
The best and cheapest CNC Controller----Beijing RICHNC Technology Co.,Ltd